Dank voor je reactie.
Ik heb het inderdaad niet goed gedaan. Echter het werkt nog steeds niet.
Hierbij zowel de foutmelding als de configfile, nadat ik deze heb aangepast.
Foutmelding
Sun Feb 22 20:59:22 2015 OpenVPN 2.3.6 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Dec 1 2014
Sun Feb 22 20:59:22 2015 library versions: OpenSSL 1.0.1j 15 Oct 2014, LZO 2.08
Enter Management Password:
Sun Feb 22 20:59:36 2015 WARNING: No server certificate verification method has been enabled. See
http://openvpn.net/howto.html#mitm for more info.
Sun Feb 22 20:59:36 2015 UDPv4 link local (bound): [undef]
Sun Feb 22 20:59:36 2015 UDPv4 link remote: [AF_INET]80.101.7.195:1194
Sun Feb 22 20:59:37 2015 [Voorbeeld] Peer Connection Initiated with [AF_INET]80.101.7.195:1194
Sun Feb 22 20:59:39 2015 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sun Feb 22 20:59:39 2015 open_tun, tt->ipv6=0
Sun Feb 22 20:59:39 2015 TAP-WIN32 device [LAN-verbinding 2] opened: \\.\Global\{04416577-E1A3-4772-8056-32FF2EE01410}.tap
Sun Feb 22 20:59:39 2015 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {04416577-E1A3-4772-8056-32FF2EE01410} [DHCP-serv: 10.8.0.5, lease-time: 31536000]
Sun Feb 22 20:59:39 2015 Successful ARP Flush on interface [39] {04416577-E1A3-4772-8056-32FF2EE01410}
Sun Feb 22 20:59:44 2015 Initialization Sequence Completed
De configfile na aanpassing.
dev tun
tls-client
remote 80.101.7.195 1194
# The "float" tells OpenVPN to accept authenticated packets from any address,
# not only the address which was specified in the --remote option.
# This is useful when you are connecting to a peer which holds a dynamic address
# such as a dial-in user or DHCP client.
# (Please refer to the manual of OpenVPN for more information.)
#float
# If redirect-gateway is enabled, the client will redirect it's
# default network gateway through the VPN.
# It means the VPN connection will firstly connect to the VPN Server
# and then to the internet.
# (Please refer to the manual of OpenVPN for more information.)
redirect-gateway
# dhcp-option DNS: To set primary domain name server address.
# Repeat this option to set secondary DNS server addresses.
dhcp-option DNS 192.168.178.1
pull
# If you want to connect by Server's IPv6 address, you should use
# "proto udp6" in UDP mode or "proto tcp6-client" in TCP mode
proto udp
script-security 2
ca ca.crt
comp-lzo
reneg-sec 0
auth-user-pass
auth-nocache
Graag je reactie.
Groet,
Twan