SABnzbd stopt regelmatig (DS212J)

[BZwart]

Ik heb sinds maart dit jaar een DS212J en bij draait SABnzbd zonder problemen. Ik heb sinds maart ongeveer 650GB binnen gehaald en SAB is nog nooit vastgelopen of gestopt.

Naast de door Matr1x voorgestelde instelling (Onderbreek downloaden tijdens nabewerken) heb ik ook "Download alleen artikelen van het begin van de wachtrij" aangevinkt staan.

[tboheeren]

Ondertussen heb ik het volgende gedaan. Ik heb een patch van synology ontvangen die improper shutdowns zou oplossen. Op het zelfde moment heb ik ook de USB stick verwijderd uit de synology. Dit heb ik gedaan omdat ik gisteren 3 improper shutdowns kreeg in één uur. In de logfiles vond ik het volgende:

Code: [Selecteer]

May 23 11:05:03 syslogd started: BusyBox v1.16.1
May 23 11:05:04 spacetool: spacetool.c:2214 [Info] Activate all VG
May 23 11:05:05 s30_synocheckuser: CheckGUserExist(1792): user [sabnzbd] not found!
May 23 11:05:05 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=sabnzbd:*:15483:0:99999:7:::
May 23 11:05:05 s30_synocheckuser: CheckGUserExist(1792): user [couchpotato] not found!
May 23 11:05:05 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=couchpotato:*:15483:0:99999:7:::
May 23 11:05:05 s30_synocheckuser: CheckGUserExist(1792): user [sickbeard] not found!
May 23 11:05:05 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=sickbeard:*:15483:0:99999:7:::
May 23 11:05:05 s30_synocheckuser: CheckGUserExist(1792): user [nzbget] not found!
May 23 11:05:05 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=nzbget:*:15483:0:99999:7:::
May 23 11:05:05 s42_synocheckgrp: SYNOICheckLocalGrp(315): replace szBuf=[users:x:100:couchpotato,sabnzbd,sickbeard,nzbget] with szOutBuf=[users:x:100:couchpotato,sabnzbd,nzbget,sickbeard]!
May 23 11:05:05 s42_synocheckgrp: SYNOICheckLocalGrp(357): Fix Local group files.
May 23 11:05:13 scemd: scemd.c:131 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
May 23 11:05:14 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
May 23 11:05:15 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
May 23 11:05:15 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
May 23 11:05:15 scemd: modules/disk_hibernation.c:1685 Force hibernation enable, idle minutes 60
May 23 11:05:15 scemd: modules/disk_hibernation.c:1693 SATA Deep sleep timer 1
May 23 11:05:15 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
May 23 11:05:17 synocheckshare: Fix shares in smb.conf.
May 23 11:05:18 synocheckshare: service_disable_set.c(68)Not defined date : id=4
May 23 11:05:22 synousbdisk: RCClean succeeded
May 23 11:05:22 synosata: synosata.c:150 failed to enum all external sata devices
May 23 11:05:24 kernel: [   68.060000] Got empty serial number. Generate serial number from product.
May 23 11:05:24 syno_hdd_util: Model:[ST2000DL003-9VT1], Firmware:[CC3C], S/N:[5YD6Q9S5] in [/dev/sdb] is not ssd
May 23 11:05:25 syno_hdd_util: Model:[ST2000DL003-9VT1], Firmware:[CC3C], S/N:[5YD6TPST] in [/dev/sda] is not ssd
May 23 11:05:25 heartbeatd: heartbeatd.c:170 Failed to get DDNS provider config: name = Synology
May 23 11:05:26 ddnsd: ddnsd.c:2086 First update for ChangeIP.com
May 23 11:05:26 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
May 23 11:05:26 hotplugd: ##### ACTION:add
May 23 11:05:26 hotplugd: DEVICE:/proc/bus/usb/001/001
May 23 11:05:26 hotplugd: DEVPATH:usb1
May 23 11:05:26 hotplugd: SUBSYSTEM:usb
May 23 11:05:26 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
May 23 11:05:26 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
May 23 11:05:26 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
May 23 11:05:26 hotplugd: ##### ACTION:add
May 23 11:05:26 hotplugd: DEVICE:/proc/bus/usb/001/001
May 23 11:05:26 hotplugd: DEVPATH:1-0:1.0
May 23 11:05:26 hotplugd: SUBSYSTEM:usb
May 23 11:05:26 hotplugd: INTERFACE:9/0/0
May 23 11:05:26 hotplugd: ##### ACTION:add
May 23 11:05:26 hotplugd: DEVICE:/proc/bus/usb/001/002
May 23 11:05:26 hotplugd: DEVPATH:1-1
May 23 11:05:26 hotplugd: SUBSYSTEM:usb
May 23 11:05:26 hotplugd: ##### ACTION:add
May 23 11:05:26 hotplugd: DEVICE:/proc/bus/usb/001/002
May 23 11:05:26 hotplugd: DEVPATH:1-1:1.0
May 23 11:05:26 hotplugd: SUBSYSTEM:usb
May 23 11:05:26 hotplugd: INTERFACE:9/0/0
May 23 11:05:26 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
May 23 11:05:26 hotplugd: ##### ACTION:add
May 23 11:05:26 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 11:05:26 hotplugd: DEVPATH:1-1.1
May 23 11:05:26 hotplugd: SUBSYSTEM:usb
May 23 11:05:26 hotplugd: ##### ACTION:add
May 23 11:05:26 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 11:05:26 hotplugd: DEVPATH:1-1.1:1.0
May 23 11:05:26 hotplugd: SUBSYSTEM:usb
May 23 11:05:26 hotplugd: INTERFACE:8/6/80
May 23 11:05:29 kernel: [   73.680000] drivers/scsi/sd.c (2344) Got USB disk
May 23 11:05:29 kernel: [   73.740000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 11:05:29 kernel: [   73.790000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 11:05:29 kernel: [   73.830000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 11:05:31 hotplugd: ##### ACTION:add
May 23 11:05:31 hotplugd: DEVNAME:sdq
May 23 11:05:31 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 11:05:31 hotplugd: DEVGUID:06040514471500380
May 23 11:05:31 hotplugd: hotplugd.c (1401) ==== USB disk [sdq] plugged in ====
May 23 11:05:31 hotplugd: hotplugd.c:1402 goto USB disk, szDeviceName=sdq
May 23 11:05:31 hotplugd: hotplugd.c:1404 ret=-1, fsType=0
May 23 11:05:32 hotplugd: ##### ACTION:add
May 23 11:05:32 hotplugd: DEVNAME:sdq
May 23 11:05:32 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 11:05:32 hotplugd: DEVGUID:06040514471500380
May 23 11:05:32 hotplugd: DEVPATH:sdq
May 23 11:05:32 hotplugd: SUBSYSTEM:block
May 23 11:05:32 hotplugd: PHYSDEVPATH:/devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host2/target2:0:0/2:0:0:0
May 23 11:05:32 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
May 23 11:05:32 hotplugd: hotplugd.c (1401) ==== USB disk [sdq] plugged in ====
May 23 11:05:32 hotplugd: hotplugd.c:1402 goto USB disk, szDeviceName=sdq
May 23 11:05:32 hotplugd: hotplugd.c:1404 ret=-1, fsType=0
May 23 11:07:23 scemd: scemd.c:328 stop manutild.
May 23 11:18:17 PkgMan.cgi: pkgtool.cpp:2445 No script for python
May 23 11:19:13 PkgMan.cgi: pkgtool.cpp:2445 No script for python
May 23 11:19:14 PkgMan.cgi: pkgtool.cpp:2445 No script for python
May 23 13:07:51 scemd: SCEMD: disk 2 wake up from hibernation
May 23 13:07:59 scemd: SCEMD: disk 1 wake up from hibernation
May 23 13:25:30 PkgMan.cgi: pkgtool.cpp:2445 No script for python
May 23 13:25:51 PkgMan.cgi: pkgtool.cpp:2445 No script for python
May 23 13:36:36 syslogd started: BusyBox v1.16.1
May 23 13:36:37 spacetool: spacetool.c:2214 [Info] Activate all VG
May 23 13:36:38 s30_synocheckuser: CheckGUserExist(1792): user [sabnzbd] not found!
May 23 13:36:38 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=sabnzbd:*:15483:0:99999:7:::
May 23 13:36:38 s30_synocheckuser: CheckGUserExist(1792): user [couchpotato] not found!
May 23 13:36:38 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=couchpotato:*:15483:0:99999:7:::
May 23 13:36:38 s30_synocheckuser: CheckGUserExist(1792): user [sickbeard] not found!
May 23 13:36:38 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=sickbeard:*:15483:0:99999:7:::
May 23 13:36:38 s30_synocheckuser: CheckGUserExist(1792): user [nzbget] not found!
May 23 13:36:38 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=nzbget:*:15483:0:99999:7:::
May 23 13:36:49 scemd: scemd.c:131 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
May 23 13:36:49 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
May 23 13:36:50 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
May 23 13:36:50 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
May 23 13:36:50 scemd: modules/disk_hibernation.c:1685 Force hibernation enable, idle minutes 60
May 23 13:36:50 scemd: modules/disk_hibernation.c:1693 SATA Deep sleep timer 1
May 23 13:36:51 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
May 23 13:36:52 synocheckshare: Fix shares in smb.conf.
May 23 13:36:54 synocheckshare: service_disable_set.c(68)Not defined date : id=4
May 23 13:36:58 synousbdisk: RCClean succeeded
May 23 13:36:58 synosata: synosata.c:150 failed to enum all external sata devices
May 23 13:36:59 kernel: [   71.390000] Got empty serial number. Generate serial number from product.
May 23 13:37:00 syno_hdd_util: Model:[ST2000DL003-9VT1], Firmware:[CC3C], S/N:[5YD6Q9S5] in [/dev/sdb] is not ssd
May 23 13:37:00 syno_hdd_util: Model:[ST2000DL003-9VT1], Firmware:[CC3C], S/N:[5YD6TPST] in [/dev/sda] is not ssd
May 23 13:37:01 heartbeatd: heartbeatd.c:170 Failed to get DDNS provider config: name = Synology
May 23 13:37:02 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
May 23 13:37:02 hotplugd: ##### ACTION:add
May 23 13:37:02 hotplugd: DEVICE:/proc/bus/usb/001/001
May 23 13:37:02 hotplugd: DEVPATH:usb1
May 23 13:37:02 hotplugd: SUBSYSTEM:usb
May 23 13:37:02 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
May 23 13:37:02 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
May 23 13:37:02 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
May 23 13:37:02 hotplugd: ##### ACTION:add
May 23 13:37:02 hotplugd: DEVICE:/proc/bus/usb/001/001
May 23 13:37:02 hotplugd: DEVPATH:1-0:1.0
May 23 13:37:02 hotplugd: SUBSYSTEM:usb
May 23 13:37:02 hotplugd: INTERFACE:9/0/0
May 23 13:37:02 ddnsd: ddnsd.c:2086 First update for ChangeIP.com
May 23 13:37:02 hotplugd: ##### ACTION:add
May 23 13:37:02 hotplugd: DEVICE:/proc/bus/usb/001/002
May 23 13:37:02 hotplugd: DEVPATH:1-1
May 23 13:37:02 hotplugd: SUBSYSTEM:usb
May 23 13:37:02 hotplugd: ##### ACTION:add
May 23 13:37:02 hotplugd: DEVICE:/proc/bus/usb/001/002
May 23 13:37:02 hotplugd: DEVPATH:1-1:1.0
May 23 13:37:02 hotplugd: SUBSYSTEM:usb
May 23 13:37:02 hotplugd: INTERFACE:9/0/0
May 23 13:37:02 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
May 23 13:37:02 hotplugd: ##### ACTION:add
May 23 13:37:02 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 13:37:02 hotplugd: DEVPATH:1-1.1
May 23 13:37:02 hotplugd: SUBSYSTEM:usb
May 23 13:37:02 hotplugd: ##### ACTION:add
May 23 13:37:02 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 13:37:02 hotplugd: DEVPATH:1-1.1:1.0
May 23 13:37:02 hotplugd: SUBSYSTEM:usb
May 23 13:37:02 hotplugd: INTERFACE:8/6/80
May 23 13:37:05 kernel: [   76.960000] drivers/scsi/sd.c (2344) Got USB disk
May 23 13:37:05 kernel: [   77.020000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 13:37:05 kernel: [   77.050000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 13:37:05 kernel: [   77.090000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 13:37:07 hotplugd: ##### ACTION:add
May 23 13:37:07 hotplugd: DEVNAME:sdq
May 23 13:37:07 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 13:37:07 hotplugd: DEVGUID:06040514471500380
May 23 13:37:07 hotplugd: hotplugd.c (1401) ==== USB disk [sdq] plugged in ====
May 23 13:37:07 hotplugd: hotplugd.c:1402 goto USB disk, szDeviceName=sdq
May 23 13:37:07 hotplugd: hotplugd.c:1404 ret=-1, fsType=0
May 23 13:37:08 hotplugd: ##### ACTION:add
May 23 13:37:08 hotplugd: DEVNAME:sdq
May 23 13:37:08 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 13:37:08 hotplugd: DEVGUID:06040514471500380
May 23 13:37:08 hotplugd: DEVPATH:sdq
May 23 13:37:08 hotplugd: SUBSYSTEM:block
May 23 13:37:08 hotplugd: PHYSDEVPATH:/devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host2/target2:0:0/2:0:0:0
May 23 13:37:08 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
May 23 13:37:08 hotplugd: hotplugd.c (1401) ==== USB disk [sdq] plugged in ====
May 23 13:37:08 hotplugd: hotplugd.c:1402 goto USB disk, szDeviceName=sdq
May 23 13:37:08 hotplugd: hotplugd.c:1404 ret=-1, fsType=0
May 23 13:38:25 logout.cgi: login.c (810) SynoCgiLoginRemoveUser failed.
May 23 13:38:59 scemd: scemd.c:328 stop manutild.
May 23 13:39:08 PkgMan.cgi: pkgtool.cpp:2445 No script for python
May 23 13:39:12 PkgMan.cgi: pkgtool.cpp:2445 No script for python
May 23 13:39:12 PkgMan.cgi: pkgtool.cpp:2445 No script for python
May 23 13:46:56 syslogd started: BusyBox v1.16.1
May 23 13:46:57 spacetool: spacetool.c:2214 [Info] Activate all VG
May 23 13:46:58 s30_synocheckuser: CheckGUserExist(1792): user [sabnzbd] not found!
May 23 13:46:58 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=sabnzbd:*:15483:0:99999:7:::
May 23 13:46:58 s30_synocheckuser: CheckGUserExist(1792): user [couchpotato] not found!
May 23 13:46:58 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=couchpotato:*:15483:0:99999:7:::
May 23 13:46:58 s30_synocheckuser: CheckGUserExist(1792): user [sickbeard] not found!
May 23 13:46:58 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=sickbeard:*:15483:0:99999:7:::
May 23 13:46:58 s30_synocheckuser: CheckGUserExist(1792): user [nzbget] not found!
May 23 13:46:58 s30_synocheckuser: CheckConsistentWithPasswd(2003): user not exist in /etc/passwd, and remove it. szBuf=nzbget:*:15483:0:99999:7:::
May 23 13:47:07 scemd: scemd.c:131 fan_type=3, raid_type=1, led_type=1, thermal_type=2, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=2, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
May 23 13:47:07 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
May 23 13:47:08 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
May 23 13:47:08 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
May 23 13:47:09 scemd: modules/disk_hibernation.c:1685 Force hibernation enable, idle minutes 60
May 23 13:47:09 scemd: modules/disk_hibernation.c:1693 SATA Deep sleep timer 1
May 23 13:47:09 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
May 23 13:47:10 synocheckshare: Fix shares in smb.conf.
May 23 13:47:12 synocheckshare: service_disable_set.c(68)Not defined date : id=4
May 23 13:47:16 synousbdisk: RCClean succeeded
May 23 13:47:16 synosata: synosata.c:150 failed to enum all external sata devices
May 23 13:47:17 kernel: [   69.280000] Got empty serial number. Generate serial number from product.
May 23 13:47:19 syno_hdd_util: Model:[ST2000DL003-9VT1], Firmware:[CC3C], S/N:[5YD6Q9S5] in [/dev/sdb] is not ssd
May 23 13:47:19 syno_hdd_util: Model:[ST2000DL003-9VT1], Firmware:[CC3C], S/N:[5YD6TPST] in [/dev/sda] is not ssd
May 23 13:47:19 heartbeatd: heartbeatd.c:170 Failed to get DDNS provider config: name = Synology
May 23 13:47:20 ddnsd: ddnsd.c:2086 First update for ChangeIP.com
May 23 13:47:20 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
May 23 13:47:20 hotplugd: ##### ACTION:add
May 23 13:47:20 hotplugd: DEVICE:/proc/bus/usb/001/001
May 23 13:47:20 hotplugd: DEVPATH:usb1
May 23 13:47:20 hotplugd: SUBSYSTEM:usb
May 23 13:47:20 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
May 23 13:47:20 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
May 23 13:47:20 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
May 23 13:47:20 hotplugd: ##### ACTION:add
May 23 13:47:20 hotplugd: DEVICE:/proc/bus/usb/001/001
May 23 13:47:20 hotplugd: DEVPATH:1-0:1.0
May 23 13:47:20 hotplugd: SUBSYSTEM:usb
May 23 13:47:20 hotplugd: INTERFACE:9/0/0
May 23 13:47:20 hotplugd: ##### ACTION:add
May 23 13:47:20 hotplugd: DEVICE:/proc/bus/usb/001/002
May 23 13:47:20 hotplugd: DEVPATH:1-1
May 23 13:47:20 hotplugd: SUBSYSTEM:usb
May 23 13:47:20 hotplugd: ##### ACTION:add
May 23 13:47:20 hotplugd: DEVICE:/proc/bus/usb/001/002
May 23 13:47:20 hotplugd: DEVPATH:1-1:1.0
May 23 13:47:20 hotplugd: SUBSYSTEM:usb
May 23 13:47:20 hotplugd: INTERFACE:9/0/0
May 23 13:47:20 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
May 23 13:47:20 hotplugd: ##### ACTION:add
May 23 13:47:20 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 13:47:20 hotplugd: DEVPATH:1-1.1
May 23 13:47:20 hotplugd: SUBSYSTEM:usb
May 23 13:47:20 hotplugd: ##### ACTION:add
May 23 13:47:20 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 13:47:20 hotplugd: DEVPATH:1-1.1:1.0
May 23 13:47:20 hotplugd: SUBSYSTEM:usb
May 23 13:47:20 hotplugd: INTERFACE:8/6/80
May 23 13:47:23 kernel: [   74.830000] drivers/scsi/sd.c (2344) Got USB disk
May 23 13:47:23 kernel: [   74.890000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 13:47:23 kernel: [   74.940000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 13:47:23 kernel: [   74.990000] sd 2:0:0:0: [sdq] Assuming drive cache: write through
May 23 13:47:25 hotplugd: ##### ACTION:add
May 23 13:47:25 hotplugd: DEVNAME:sdq
May 23 13:47:25 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 13:47:25 hotplugd: DEVGUID:06040514471500380
May 23 13:47:25 hotplugd: hotplugd.c (1401) ==== USB disk [sdq] plugged in ====
May 23 13:47:25 hotplugd: hotplugd.c:1402 goto USB disk, szDeviceName=sdq
May 23 13:47:25 hotplugd: hotplugd.c:1404 ret=-1, fsType=0
May 23 13:47:26 hotplugd: ##### ACTION:add
May 23 13:47:26 hotplugd: DEVNAME:sdq
May 23 13:47:26 hotplugd: DEVICE:/proc/bus/usb/001/003
May 23 13:47:26 hotplugd: DEVGUID:06040514471500380
May 23 13:47:26 hotplugd: DEVPATH:sdq
May 23 13:47:26 hotplugd: SUBSYSTEM:block
May 23 13:47:26 hotplugd: PHYSDEVPATH:/devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host2/target2:0:0/2:0:0:0
May 23 13:47:26 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
May 23 13:47:26 hotplugd: hotplugd.c (1401) ==== USB disk [sdq] plugged in ====
May 23 13:47:26 hotplugd: hotplugd.c:1402 goto USB disk, szDeviceName=sdq
May 23 13:47:26 hotplugd: hotplugd.c:1404 ret=-1, fsType=0
May 23 13:48:24 logout.cgi: login.c (810) SynoCgiLoginRemoveUser failed.
May 23 13:50:19 syslogd started: BusyBox v1.16.1

Ik heb ook sickbeard & cp stopgezet. Beide gebruikte de USB stick voor logging. SAB gebruikt deze stick niet. Momenteel heb ik 3 succesvolle downloads gehad, ik ga vandaag verder testen of dit het probleem opgelost heeft.
My question: Is het mogelijk dat een oude USB stick dit alles veroorzaakt?
Op andere fora hebben mensen het hier ook over http://59.124.41.244/enu/viewtopic.php? ... 0&start=30

[Matr1x]

Ik heb ook sickbeard & cp stopgezet. Beide gebruikte de USB stick voor logging. SAB gebruikt deze stick niet.

Ik had dit eerst ook, maar daar ben ik op teruggekomen. De reden om een USB stick te gebruiken was voor mij om je harddisk niet uit hibernate mode te halen. Eigenlijk heeft dit dan alleen zit om de watch folder van SABnzbd op USB stick te zetten. Want als pakketten de logfile bijwerken, is gaat dit altijd in combinatie met een harddisk activiteit. Voor SABnzbd gebeurt dit namelijk als er iets gedownload of processed gaat worden. En SickBeard, Headphones, AutoSub scannen altijd je media folder voor ze de log bijwerken. Alleen CouchPotato scant geen folders en hiervan zou de log eventueel beter op USB stick kunnen staan.

My question: Is het mogelijk dat een oude USB stick dit alles veroorzaakt?
Op andere fora hebben mensen het hier ook over

Ja dat kan. Iedere device (USB stick, harddisk, SD kaart, eSATA disk etc) wordt gemount en er wordt regelmatig gecontroleerd of deze nog beschikbaar is. Als er iets mis is met zo'n device kan je systeem dusdanig in de stress raken dat er een reboot noodzakelijk is. Dit kan namelijk een soort kortsluiting (stroomstoring) zijn. Het kan dus ook aan een USB kabel liggen of zelfs een eSATA kabel. Het kan ook aan een stekker liggen.

Ik heb zelf ook een hele oude 128Kb USB stick in de DS212+ zitten voor de watch folder van SABnzbd. Deze is van IBM en doet het (nog steeds) perfect. Heb je een USB stick of SD kaart van slechte kwaleit, dan vraag je gewoon om problemen (niet alleen bij een DiskStation).

[jeroenV]

kijk eens in je status log van SABNZBD links boven, ik had hetzelfde probleem, ik had de volgende melding:

2012-07-31 21:11:22,852

FOUT:

Te veel verbindingen met server news.pureusenet.nl:119

Dus ik kijken, ja hoor, ik had 8 verbindingen ingesteld, en ik heb een abo met 4.

[Meanno]

Ik had hetzelfde probleem, en heb voor mijzelf een oplossing gevonden. Alles ging altijd goed met downloaden. Nooit stopte sabnzbd uit zichzelf. Ik sloeg de bestanden altijd op in een map genaamd 'Downloads'. Toen veranderde ik deze naar de gedeelde map 'video'. Vanaf toen begon het probleem. Vandaag had ik bij wijze van een test de mappen weer terugveranderd, en nu ben ik weer van het probleem af! Bizar maar waar.

[weedaj]

Ik heb sinds maart dit jaar een DS212J en bij draait SABnzbd zonder problemen. Ik heb sinds maart ongeveer 650GB binnen gehaald en SAB is nog nooit vastgelopen of gestopt.

Naast de door Matr1x voorgestelde instelling (Onderbreek downloaden tijdens nabewerken) heb ik ook "Download alleen artikelen van het begin van de wachtrij" aangevinkt staan.

Ik zou zeker ook de IONice instellingen checken. Zie onderstaande uit post viewtopic.php?f=50&t=8761&start=15:

Tips voor de beste beschikbaarheid en performance van sabnzb op DS212J:

• Activeer 'Pause Downloading During Post-Processing' (config->Switches); bij bewerken van meerdere (grotere) bestanden zal de NAS geheugen te kort komen en zal sabnzb crashen
• 'IONice Parameters'(config->Switches): -c2 -n4; om de I/O prioriteit van sabnzb te verlagen
• Download zonder SSL; wanneer sabnzb via een SSL verbinding download wordt (bij mij) nog niet de helft van de snelheid zonder SSL gehaald.(SSL: 2,1 Mb/s, zonder SSL: 5 Mb/s)

[/i]

Daarnaast zou  je kunnen proberen je 'Article Cache Limit' (config->General, bijna onderaan) terug te schroeven naar bijvoorbeeld '64M'. Met deze instellingen werkt dezelfde setup voor mij als een zonnetje. Laat je weten of dit helpt?