Na veel zoeken via diverse fora heb ik oscam werkend gekregen op mijn synology NAS. Ook herkend oscam de triple reader. Echter de kaart wordt niet goed herkend.
Hieronder een log:
2013/07/24 07:46:11 FAA28 r triple_reader [smartreader] Using 0x02/0x81 as endpoint for smartreader hardware detection
2013/07/24 07:46:11 FC680 h webif: decompressed 52303 bytes back into 151220 bytes
2013/07/24 07:46:11 FC680 h HTTP Server running. ip=0.0.0.0 port=16200
2013/07/24 07:46:11 FAA28 r Found reader with serial 00000b57 at 001:006
2013/07/24 07:46:11 FAA28 r Found smartreader device Serial:00000b57
2013/07/24 07:46:11 FAA28 r triple_reader [smartreader] Reader initialized (device=TripleP1;Serial:00000b57, detect=cd, mhz=357, cardmhz=357)
2013/07/24 07:46:12 FAA28 r triple_reader [smartreader] card detected
2013/07/24 07:46:13 FAA28 r triple_reader [smartreader] ATR: xxx
2013/07/24 07:46:13 FAA28 r triple_reader [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=1
2013/07/24 07:46:13 FAA28 r triple_reader [smartreader] Calculated work ETU is 104.20 us
2013/07/24 07:46:13 FAA28 r triple_reader [smartreader] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.43 MHz (specified in reader->mhz)
2013/07/24 07:46:17 FAA28 r triple_reader [smartreader] card system not supported
2013/07/24 07:46:17 FAA28 r triple_reader [smartreader] Normal mode failed, reverting to Deprecated Mode
2013/07/24 07:46:18 FAA28 r triple_reader [smartreader] ATR: xxx
2013/07/24 07:46:18 FAA28 r triple_reader [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=1
2013/07/24 07:46:18 FAA28 r triple_reader [smartreader] Calculated work ETU is 108.45 us
2013/07/24 07:46:18 FAA28 r triple_reader [smartreader] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.43 MHz (specified in reader->mhz)
2013/07/24 07:46:19 FAA28 r triple_reader [smartreader] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0
2013/07/24 07:46:19 FAA28 r triple_reader [smartreader] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2013/09/20
2013/07/24 07:46:19 FAA28 r triple_reader [smartreader] SA: ########
2013/07/24 07:46:20 FAA28 r triple_reader [smartreader] no PBM for provider 1
2013/07/24 07:46:20 FAA28 r triple_reader [smartreader] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2013/09/19
2013/07/24 07:46:20 FAA28 r triple_reader [smartreader] SA: ########
2013/07/24 07:46:21 FAA28 r triple_reader [smartreader] PBM for provider 2: e000000000000000
2013/07/24 07:46:21 FAA28 r triple_reader [smartreader] providers: 2 (0000,006A)
2013/07/24 07:46:21 FAA28 r triple_reader [smartreader] parental locked
2013/07/24 07:46:21 FAA28 r triple_reader [smartreader] ready for requests
2013/07/24 07:46:21 FAA28 r triple_reader [smartreader] found card system seca
2013/07/24 07:46:21 FAA28 r triple_reader [seca] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2013/09/20
2013/07/24 07:46:21 FAA28 r triple_reader [seca] SA: ########
2013/07/24 07:46:21 FAA28 r triple_reader [seca] no PBM for provider 1
2013/07/24 07:46:21 FAA28 r triple_reader [seca] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2013/09/19
2013/07/24 07:46:21 FAA28 r triple_reader [seca] SA: ########
2013/07/24 07:46:21 FAA28 r triple_reader [seca] PBM for provider 2: e000000000000000
2013/07/24 07:46:22 FAA28 r triple_reader [seca] card ejected
2013/07/24 07:46:22 0 s init for all local cards done
2013/07/24 07:46:22 0 s anti cascading disabled
Oscam.server:
[reader]
label = triple_reader
protocol = smartreader
device = TripleP1;Serial:00000b57
caid = 0100
detect = cd
group = 1
emmcache = 1,1,15
ratelimitecm = 4
ratelimitseconds = 10
Iemand een idee naar de oorzaak, maar nog beter heeft iemand een oplossing?
