En als je eens de smartinfo wilt opvragen zonder op DSM in te loggen kan dat ook op de commandline met:
smartctl -d ata -a /dev/sda
smartctl -d ata -a /dev/sdb
smartctl -d ata -a /dev/sdc
etc
Je krijgt dan iets als:
~# smartctl -d ata -a /dev/sdb
smartctl 6.5 (build date Jun 8 2018) [x86_64-linux-3.10.105] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD30EFRX-68AX9N0
Serial Number: WD-WMC1T*******
LU WWN Device Id: 5 0014ee 6ae23618f
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Aug 31 13:30:59 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (41160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 413) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 25
3 Spin_Up_Time 0x0027 181 179 021 Pre-fail Always - 5950
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 119
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 44294
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 119
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 39
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 79
194 Temperature_Celsius 0x0022 121 114 000 Old_age Always - 29
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 44214 -
# 2 Short offline Completed without error 00% 44047 -
# 3 Short offline Completed without error 00% 43879 -
# 4 Short offline Completed without error 00% 43711 -
# 5 Short offline Completed without error 00% 43543 -
# 6 Short offline Completed without error 00% 43375 -
# 7 Short offline Completed without error 00% 43208 -
# 8 Short offline Completed without error 00% 43040 -
# 9 Short offline Completed without error 00% 42872 -
#10 Short offline Completed without error 00% 42704 -
#11 Short offline Completed without error 00% 42536 -
#12 Short offline Completed without error 00% 42369 -
#13 Short offline Completed without error 00% 42201 -
#14 Short offline Completed without error 00% 42033 -
#15 Short offline Completed without error 00% 41865 -
#16 Short offline Completed without error 00% 41697 -
#17 Short offline Completed without error 00% 41529 -
#18 Short offline Completed without error 00% 41362 -
#19 Short offline Completed without error 00% 41194 -
#20 Short offline Completed without error 00% 41026 -
#21 Short offline Completed without error 00% 40858 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Laat volgens mij meer detail zien dan de info die DSM toont. b.v. het smartlog met de resultaten van de laatste 21 tests staan niet in DSM