Uiteindelijk antwoord gehad van Synology:
If there are no 'major content' of the DSM setting, you could go to Storage Manager > Overview, to repair the system partition.
By doing this, the 'system' will be overwritten by the new installation DSM on disk 1 - the spare disk, that equal reinstall the DSM, and your DSM setting will be clean also, such as local account you have created, the firewall rules, etc.Dit heb ik gedaan. Bij Opslagbeheer stond inderdaad "herstellen" waarna de systeempartities op schijf 2,3 en 4 werden hersteld en de status "normaal" kregen.
Then you could insert the original disk 1 to have another check - the SMART test, to see if all the disk are healthy.Hier ging het niet goed. Wanneer ik de orginele Disk 1 er weer in had gestopt , startte hij niet meer op. En weer de blauwe led knipperend.
Na een tijdje deze orginele schijf 1 er weer uitgehaald, aangesloten als USB, partities verwijderd en geformateerd en teruggeplaatst.
En eindelijk werd deze schijf ook hersteld van systeempartitie.
For WD disk, these marked RAW data should be 0 of healthy disk.
If all the disk are fine, you could repair the volume with healthy disk again.
https://www.synology.com/knowledgebase/DSM/help/DSM/StorageManager/volume_diskgroup_repair
If not, so of your disk with error logged, please kindly backup all the data if possible, then replace the disk to create new volume with healthy disk if need to be.
Hope this clear for you.Uiteindelijk de procedure voor het repareren van het Volume uitgevoerd. Ben heel blij dat m'n Volume nog wel in tact was en dus al m'n bestanden (Alhoewel ik de belangrijkste data backup) maar ik moest wel m'n DSM opnieuw instellen en alle packages opnieuw installeren alsmede het opnieuw instellen van surveillancestation en licenses toevoegen.
Naar aanleiding van deze toestand heb ik nog wel 2 vragen :
1. Wat kan de oorzaak zijn van het beschadigen van de systeempartitie (op alle schijven) na een update ?
2. Is het mogelijk om ook een image (of backup) van de systeempartitie te maken incl. alle packages en instellingen.