Auteur Topic: Hibernation DS213+ Got empty serial number. Generate seria  (gelezen 2621 keer)

Offline denny

  • Bedankjes
  • -Gegeven: 17
  • -Ontvangen: 0
  • Berichten: 46
Hibernation DS213+ Got empty serial number. Generate seria
« Gepost op: 29 januari 2013, 12:04:16 »
Hi,

Ik weet dat er veel gevraagd en geschreven is over hibernation en ben al een tijdje bezig om mijn oplossing te vinden maar tot op heden nog niet geslaagd, hoop dat jullie mij kunnen helpen met het uitlezen van het hibernate log.

Ik heb geen andere software geïnstalleerd anders dan download station(uitgeschakeld) en photo (uitgeschakeld) Ik krijg heel veel logs hieronder een deel.
Ik heb geen USB stick in mijn syno en naar mijn weten schrijft geen programma erna.. hij is nagenoeg kaal. Hebben jullie een idee?
Alvast bedankt,
Denny

an 20 14:31:55 kernel: [ 6611.600821] usb usb2: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
Jan 20 14:31:55 kernel: [ 6611.789974] Got empty serial number. Generate serial number from product.
Jan 20 14:31:55 scemd: SCEMD: disk 2 wake up from hibernation
Jan 20 14:31:55 scemd: modules/disk_hibernation.c:2040 Diskstation wakes up from deep sleep.
Jan 20 14:32:09 scemd: SCEMD: disk 1 wake up from hibernation
Jan 20 14:32:10 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/003, usbid=05e3:0726:000000009910
Jan 20 14:32:10 hotplugd: ##### ACTION:remove
Jan 20 14:32:10 hotplugd: DEVNAME:sdq
Jan 20 14:32:10 hotplugd: DEVICE:/proc/bus/usb/001/003
Jan 20 14:32:10 hotplugd: DEVPATH:sdq
Jan 20 14:32:10 hotplugd: SUBSYSTEM:block
Jan 20 14:32:10 hotplugd: PHYSDEVPATH:/devices/platform/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0/host5/target5:0:0/5:0:0:0
Jan 20 14:32:10 hotplugd: hotplugd.c (1453) ==== USB disk [sdq] plugged out====
Jan 20 14:32:10 hotplugd: SYNOReadOneSectorFromDev(56): failed to open device [/dev/sdq] (errno = 6)
Jan 20 14:32:10 hotplugd: volume_parts_info_get_by_dev.c:92 Dev:sdq cannot find PostfixNumber.
Jan 20 14:32:10 hotplugd: SYNOReadOneSectorFromDev(56): failed to open device [/dev/sdq] (errno = 6)
Jan 20 14:32:10 hotplugd: usbbkp_is_dev_bkp_disk.c:85 SYNOReadOneSectorFromDev failed. szDevPath=[sdq], errno=[0x0900]
Jan 20 14:32:10 hotplugd: volume_parts_info_get_by_dev.c:318 failed to get disk '/dev/sdq' size
Jan 20 14:32:10 hotplugd: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdq] failed. (0xD00)
Jan 20 14:32:10 hotplugd: hotplugd.c:1457 Failed to handle USB disk hotplug out.
Jan 20 14:32:10 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/003, usbid=05e3:0726:000000009910
Jan 20 14:32:10 hotplugd: ##### ACTION:remove
Jan 20 14:32:10 hotplugd: DEVNAME:sdr
Jan 20 14:32:10 hotplugd: DEVICE:/proc/bus/usb/001/003
Jan 20 14:32:10 hotplugd: DEVPATH:sdr
Jan 20 14:32:10 hotplugd: SUBSYSTEM:block
Jan 20 14:32:10 hotplugd: PHYSDEVPATH:/devices/platform/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0/host5/target5:0:0/5:0:0:1
Jan 20 14:32:10 hotplugd: hotplugd.c (1453) ==== USB disk [sdr] plugged out====
Jan 20 14:32:10 hotplugd: SYNOReadOneSectorFromDev(56): failed to open device [/dev/sdr] (errno = 6)
Jan 20 14:32:10 hotplugd: volume_parts_info_get_by_dev.c:92 Dev:sdr cannot find PostfixNumber.
Jan 20 14:32:10 hotplugd: SYNOReadOneSectorFromDev(56): failed to open device [/dev/sdr] (errno = 6)
Jan 20 14:32:10 hotplugd: usbbkp_is_dev_bkp_disk.c:85 SYNOReadOneSectorFromDev failed. szDevPath=[sdr], errno=[0x0900]
Jan 20 14:32:10 hotplugd: volume_parts_info_get_by_dev.c:318 failed to get disk '/dev/sdr' size
Jan 20 14:32:10 hotplugd: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdr] failed. (0x2000)
Jan 20 14:32:10 hotplugd: hotplugd.c:1457 Failed to handle USB disk hotplug out.
Jan 20 14:32:10 hotplugd: hotplugd.c (1240) Failed to get ACTION from /tmp/hotplug.1110
Jan 20 14:32:10 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:fsl-ehci.0
Jan 20 14:32:10 hotplugd: ##### ACTION:add
Jan 20 14:32:10 hotplugd: DEVICE:/proc/bus/usb/001/001
Jan 20 14:32:10 hotplugd: DEVPATH:usb1
Jan 20 14:32:10 hotplugd: SUBSYSTEM:usb
Jan 20 14:32:10 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Jan 20 14:32:10 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Jan 20 14:32:10 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:fsl-ehci.0
Jan 20 14:32:10 hotplugd: ##### ACTION:add
Jan 20 14:32:10 hotplugd: DEVICE:/proc/bus/usb/001/001
Jan 20 14:32:10 hotplugd: DEVPATH:1-0:1.0
Jan 20 14:32:10 hotplugd: SUBSYSTEM:usb
Jan 20 14:32:10 hotplugd: INTERFACE:9/0/0
Jan 20 14:32:10 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0003:0002:05:00.0
Jan 20 14:32:10 hotplugd: ##### ACTION:add
Jan 20 14:32:10 hotplugd: DEVICE:/proc/bus/usb/002/001
Jan 20 14:32:10 hotplugd: DEVPATH:usb2
Jan 20 14:32:10 hotplugd: SUBSYSTEM:usb
Jan 20 14:32:10 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2
Jan 20 14:32:10 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , )
Jan 20 14:32:10 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0003:0002:05:00.0
Jan 20 14:32:10 hotplugd: ##### ACTION:add
Jan 20 14:32:10 hotplugd: DEVICE:/proc/bus/usb/002/001
Jan 20 14:32:10 hotplugd: DEVPATH:2-0:1.0
Jan 20 14:32:10 hotplugd: SUBSYSTEM:usb
Jan 20 14:32:10 hotplugd: INTERFACE:9/0/0
Jan 20 14:32:10 hotplugd: ##### ACTION:add
Jan 20 14:32:10 hotplugd: DEVICE:/proc/bus/usb/001/002
Jan 20 14:32:10 hotplugd: DEVPATH:1-1
Jan 20 14:32:10 hotplugd: SUBSYSTEM:usb
Jan 20 14:32:10 hotplugd: hotplugd.c:835 ##### complete device hotplug!!
Jan 20 14:32:10 hotplugd: ##### ACTION:add
Jan 20 14:32:10 hotplugd: DEVICE:/proc/bus/usb/001/002
Jan 20 14:32:10 hotplugd: DEVPATH:1-1:1.0
Jan 20 14:32:10 hotplugd: SUBSYSTEM:usb
Jan 20 14:32:10 hotplugd: INTERFACE:9/0/0
Jan 20 14:32:10 hotplugd: hotplugd.c:835 ##### complete device hotplug!!


Jan 20 16:45:25 kernel: [14608.145227] Got empty serial number. Generate serial number from product.
Jan 20 16:45:25 scemd: SCEMD: disk 1 wake up from hibernation
Jan 20 16:45:25 scemd: modules/disk_hibernation.c:2040 Diskstation wakes up from deep sleep.
Jan 20 16:47:12 scemd: SCEMD: disk 2 wake up from hibernation
Jan 20 16:47:13 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0003:0002:05:00.0
Jan 20 16:47:13 hotplugd: ##### ACTION:remove
Jan 20 16:47:13 hotplugd: DEVICE:/proc/bus/usb/002/001

Offline Martijndez

  • MVP
  • *
  • Bedankjes
  • -Gegeven: 115
  • -Ontvangen: 191
  • Berichten: 1.186
Hibernation DS213+ Got empty serial number. Generate seria
« Reactie #1 Gepost op: 29 januari 2013, 13:43:37 »
Welke schijven heb je?
DIY NAS, Core I3 3.8Ghz, 8gb DDR 1600, 6 x WD60EFRX, OpenMediaVault 2.*
DS115j, 1 x WD6400AACS met DSM 5.1

Offline denny

  • Bedankjes
  • -Gegeven: 17
  • -Ontvangen: 0
  • Berichten: 46
Re: Hibernation DS213+ Got empty serial number. Generate se
« Reactie #2 Gepost op: 29 januari 2013, 14:03:15 »
Ik heb  2X WD20EARX 2TB schijven


 

4.3 en Hibernation

Gestart door iefboBoard Synology DSM 5.1 en eerder

Reacties: 29
Gelezen: 13879
Laatste bericht 25 september 2013, 06:20:39
door eboman
HDD Hibernation uitzette?

Gestart door HHGDBoard Synology DSM algemeen

Reacties: 7
Gelezen: 2960
Laatste bericht 24 december 2013, 16:56:01
door henkg
Hibernation mode van de HDD's

Gestart door HomerBoard Synology DSM 5.1 en eerder

Reacties: 21
Gelezen: 7197
Laatste bericht 08 december 2013, 15:16:07
door Birdy
Synology CS-406 hibernation mode

Gestart door AnonymousBoard NAS hardware vragen

Reacties: 2
Gelezen: 3049
Laatste bericht 10 april 2008, 20:31:20
door Anonymous
Hibernation mode van de HDD's

Gestart door HomerBoard Synology DSM 5.1 en eerder

Reacties: 14
Gelezen: 4038
Laatste bericht 03 november 2014, 16:12:24
door Homer