Blauw knipperend licht. Geen boot DS210j. Harde herstart!

[Frank77]

Mijn DS210j heeft nu met firmware DSM 4 (4428) het afgelopen maand drie keer gepresteerd om tijdens het starten alleen een knipperende blauwe lamp te geven. Tevens knipperd het LAN veelvuldig.
Dit kan 10 minuten doorgaan maar geen vervolg. Inknoppen powerknop om af te sluiten heeft geen nut. Wel een piep, maar lamp blijft knipperen.

Na het afhalen van de netspanning start de diskstation weer gewoon binnen 2 minuten op. Wat is hier aan de hand?

Volgens :
http://forum.synology.com/enu/viewtopic.php?f=39&t=7823
de tail uitgevoerd.

Om 19:54:07 power knop ingedrukt : geen respons
Om 19:55 stroom eraf en opnieuw gestart (zie hieronder)

Zie laatste regels onderaan deze dump. Ik hoop dat iemand iets kan zeggen

Aug 26 09:57:31 scemd: scemd.c:328 stop manutild.
Aug 26 22:30:01 scemd: SCEMD: disk 1 wake up from hibernation
Aug 26 22:30:15 scemd: scemd.c:255 receive SIGTERM
Aug 26 22:30:15 scheduler: scheduler.c (1755) Got signal. Die gracefully.
Aug 26 22:30:22 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Aug 26 22:30:26 usbipd: syno_usbipd_func.c:3382(No child processes) got signal=15
Aug 26 22:30:27 usbipd: stub_server.c:1111(Interrupted system call) got exit signal , exit
killall: synolunbkp: no process killed
Aug 26 22:30:39 ntpdate: Sync with time server 64.250.229.100 offset 0.723414 sec.
Aug 26 22:30:42 syslogd exiting
Aug 29 19:43:54 syslogd started: BusyBox v1.16.1
Aug 29 19:43:54 kernel: [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
Aug 29 19:43:54 kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Aug 29 19:43:54 kernel: [    0.000000] Machine: Feroceon-KW
Aug 29 19:43:54 kernel: [    0.000000] Using UBoot passing parameters structure
Aug 29 19:43:54 kernel: [    0.000000] Sys Clk = 200000000, Tclk = 166666667
Aug 29 19:43:54 kernel: [    0.000000] Synology Board ID: 21
Aug 29 19:43:54 kernel: [    0.000000] Memory policy: ECC disabled, Data cache writeback
Aug 29 19:43:54 kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 32512
Aug 29 19:43:54 kernel: [    0.000000] Synology Hareware Version: DS210jv20-j
Aug 29 19:43:54 kernel: [    0.000000] Internal HD num: 2
Aug 29 19:43:54 kernel: [    0.000000] Internal netif num: 1
Aug 29 19:43:54 kernel: [    0.000000] Console: colour dummy device 80x30
Aug 29 19:43:54 kernel: [    0.230000] Mount-cache hash table entries: 512
Aug 29 19:43:54 kernel: [    0.250000]
Aug 29 19:43:54 kernel: [    0.250000] CPU Interface
Aug 29 19:43:54 kernel: [    0.250000] -------------
Aug 29 19:43:54 kernel: [    0.250000] SDRAM_CS0 ....base 00000000, size 128MB
Aug 29 19:43:54 kernel: [    0.250000] SDRAM_CS1 ....disable
Aug 29 19:43:54 kernel: [    0.250000] SDRAM_CS2 ....disable
Aug 29 19:43:54 kernel: [    0.250000] SDRAM_CS3 ....disable
Aug 29 19:43:54 kernel: [    0.250000] PEX0_MEM ....base e0000000, size 128MB
Aug 29 19:43:54 kernel: [    0.250000] PEX0_IO ....base f2000000, size   1MB
Aug 29 19:43:54 kernel: [    0.250000] PEX1_MEM ....no such
Aug 29 19:43:54 kernel: [    0.250000] PEX1_IO ....no such
Aug 29 19:43:54 kernel: [    0.250000] INTER_REGS ....base f1000000, size   1MB
Aug 29 19:43:54 kernel: [    0.250000] NFLASH_CS ....base fa000000, size   2MB
Aug 29 19:43:54 kernel: [    0.250000] SPI_CS ....base f4000000, size  16MB
Aug 29 19:43:54 kernel: [    0.250000] BOOT_ROM_CS ....no such
Aug 29 19:43:54 kernel: [    0.250000] DEV_BOOTCS ....no such
Aug 29 19:43:54 kernel: [    0.250000] CRYPT_ENG ....base f0000000, size   2MB
Aug 29 19:43:54 kernel: [    0.250000]  Detected Tclk 200000000 and SysClk 400000000
Aug 29 19:43:54 kernel: [    0.250000] Synology 6281 1, 2 bay GPIO Init
Aug 29 19:43:54 kernel: [    0.750000] PEX0 interface detected no Link.
Aug 29 19:43:54 kernel: [    0.750000] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
Aug 29 19:43:54 kernel: [    0.760000] bio: create slab <bio-0> at 0
Aug 29 19:43:54 kernel: [    2.320000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 29 19:43:54 kernel: [    7.950000] ata1: link is slow to respond, please be patient (ready=0)
Aug 29 19:43:54 kernel: [   13.340000] Delay 5 seconds to wait for disk 2 ready.
Aug 29 19:43:54 kernel: [   23.890000] ata2: link is slow to respond, please be patient (ready=0)
Aug 29 19:43:54 kernel: [   26.220000] SPI Serial flash detected @ 0xf8000000, 4096KB (64sec x 64KB)
Aug 29 19:43:54 kernel: [   26.280000] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.
Aug 29 19:43:54 kernel: [   26.290000] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0.
Aug 29 19:43:54 kernel: [   26.290000] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0.
Aug 29 19:43:54 kernel: [   26.300000] Serial Number: 9BG6N02281
Aug 29 19:43:54 kernel: [   26.320000] mvCpuIfTargetWinBaseLowGet:ERR. Getting target 11 failed.
Aug 29 19:43:54 kernel: [   26.320000] mvCpuIfTargetWinSizeGet:ERR. Getting target 11 failed.
Aug 29 19:43:54 kernel: [   26.340000]   o Cached descriptors in DRAM
Aug 29 19:43:54 kernel: [   26.350000]   o DRAM SW cache-coherency
Aug 29 19:43:54 kernel: [   26.350000]   o 2 Giga ports supported
Aug 29 19:43:54 kernel: [   26.350000]   o Single RX Queue support - ETH_DEF_RXQ=0
Aug 29 19:43:54 kernel: [   26.360000]   o Single TX Queue support - ETH_DEF_TXQ=0
Aug 29 19:43:54 kernel: [   26.360000]   o TCP segmentation offload (TSO) supported
Aug 29 19:43:54 kernel: [   26.370000]   o Receive checksum offload supported
Aug 29 19:43:54 kernel: [   26.370000]   o Transmit checksum offload supported
Aug 29 19:43:54 kernel: [   26.380000]   o SKB Recycle supported - (Enabled)
Aug 29 19:43:54 kernel: [   26.380000]   o Rx descripors: q0=128
Aug 29 19:43:54 kernel: [   26.390000]   o Tx descripors: q0=532
Aug 29 19:43:54 kernel: [   26.390000]   o Loading network interface(s):
Aug 29 19:43:54 kernel: [   26.400000]     o  register under mv88fx_eth platform
Aug 29 19:43:54 kernel: [   26.400000]     o eth0, ifindex = 2, GbE port = 0
Aug 29 19:43:54 kernel: [   26.410000]     o eth0, phy chipid = 1410e40, Support WOL = 0
Aug 29 19:43:54 kernel: [   26.410000]
Aug 29 19:43:54 kernel: [   28.080000] VFS: Mounted root (ext2 filesystem) on device 1:0.
Aug 29 19:43:54 kernel: [   28.350000] md: sda2 has different UUID to sda1
Aug 29 19:43:54 kernel: [   28.360000] md: sdb2 has different UUID to sda1
Aug 29 19:43:54 kernel: [   28.440000] ds210j_synobios: module license 'Synology Inc.' taints kernel.
Aug 29 19:43:54 kernel: [   28.440000] Disabling lock debugging due to kernel taint
Aug 29 19:43:54 kernel: [   28.470000] correction with 0x03
Aug 29 19:43:54 kernel: [   28.570000] Brand: Synology
Aug 29 19:43:54 kernel: [   28.570000] Model: DS-210j
Aug 29 19:43:54 kernel: [   28.580000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
Aug 29 19:43:54 kernel: [   28.620000] synobios: unload
Aug 29 19:43:54 kernel: [   35.750000] VFS: Mounted root (ext3 filesystem) on device 9:0.
Aug 29 19:43:54 kernel: [   39.940000] raid6: int32x1     55 MB/s
Aug 29 19:43:54 kernel: [   40.110000] raid6: int32x2     67 MB/s
Aug 29 19:43:54 kernel: [   40.280000] raid6: int32x4     78 MB/s
Aug 29 19:43:54 kernel: [   40.450000] raid6: int32x8     71 MB/s
Aug 29 19:43:54 kernel: [   40.450000] raid6: using algorithm int32x4 (78 MB/s)
Aug 29 19:43:54 kernel: [   42.360000] cesadev_init(bf234000)
Aug 29 19:43:54 kernel: [   42.410000] mvCesaInit: sessions=10240, queue=64, pSram=f0000000
Aug 29 19:43:54 kernel: [   42.680000] encryptfs using the OCF package.
Aug 29 19:43:54 kernel: [   43.440000] correction with 0x03
Aug 29 19:43:54 kernel: [   43.540000] Brand: Synology
Aug 29 19:43:54 kernel: [   43.550000] Model: DS-210j
Aug 29 19:43:54 kernel: [   43.550000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
Aug 29 19:43:54 dhcpcd[2586]: dhcpReboot: do not want cache
Aug 29 19:43:55 dhcpcd[2586]: client.c(1589)HUP ddnsd result: return code = 256
Aug 29 19:43:56 spacetool: spacetool.c:2214 [Info] Activate all VG
Aug 29 19:44:05 scemd: scemd.c:131 fan_type=7, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, u
sbcopy_type=1, fan_number=1, ebox_type=1, pis_type=1, rtc_type=2
Aug 29 19:44:05 scemd: modules/fan_speed_adjust_common.c:116 Type: INTERNAL Fan Mode: LOW
Aug 29 19:44:06 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
Aug 29 19:44:06 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
Aug 29 19:44:06 scemd: modules/disk_hibernation.c:1685 Force hibernation enable, idle minutes 10
Aug 29 19:44:06 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Aug 29 19:44:15 kernel: [   67.930000] Got empty serial number. Generate serial number from product.
Aug 29 19:44:17 syno_hdd_util: Model:[ST31000528AS], Firmware:[CC37], S/N:[9VP2A0SG] in [/dev/sdb] is not ssd
Aug 29 19:44:17 syno_hdd_util: Model:[ST31000528AS], Firmware:[CC37], S/N:[9VP24GJ8] in [/dev/sda] is not ssd
Aug 29 19:44:19 synousbdisk: RCClean succeeded
Aug 29 19:44:20 synosata: synosata.c:150 failed to enum all external sata devices
Aug 29 19:44:21 ddnsd: main(ddnsd.c:2945):  not enable DDNS, shutdown daemon
Aug 29 19:44:21 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Aug 29 19:44:22 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Aug 29 19:44:22 hotplugd: ##### ACTION:add
Aug 29 19:44:22 hotplugd: DEVICE:/proc/bus/usb/001/001
Aug 29 19:44:22 hotplugd: DEVPATH:usb1
Aug 29 19:44:22 hotplugd: SUBSYSTEM:usb
Aug 29 19:44:22 hotplugd: hotplugd.c:763 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Aug 29 19:44:22 hotplugd: hotplugd.c:1289 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add,
 , )
Aug 29 19:44:22 hotplugd: hotplugd.c:988 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:orion-ehci.0
Aug 29 19:44:22 hotplugd: ##### ACTION:add
Aug 29 19:44:22 hotplugd: DEVICE:/proc/bus/usb/001/001
Aug 29 19:44:22 hotplugd: DEVPATH:1-0:1.0
Aug 29 19:44:22 hotplugd: SUBSYSTEM:usb
Aug 29 19:44:22 hotplugd: INTERFACE:9/0/0
Aug 29 19:44:22 hotplugd: ##### ACTION:add
Aug 29 19:44:22 hotplugd: DEVICE:/proc/bus/usb/001/002
Aug 29 19:44:22 hotplugd: DEVPATH:1-1
Aug 29 19:44:22 hotplugd: SUBSYSTEM:usb
Aug 29 19:44:22 hotplugd: ##### ACTION:add
Aug 29 19:44:22 hotplugd: DEVICE:/proc/bus/usb/001/002
Aug 29 19:44:22 hotplugd: DEVPATH:1-1:1.0
Aug 29 19:44:22 hotplugd: SUBSYSTEM:usb
Aug 29 19:44:22 hotplugd: INTERFACE:9/0/0
Aug 29 19:44:22 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Aug 29 19:44:22 hotplugd: ##### ACTION:add
Aug 29 19:44:22 hotplugd: DEVICE:/proc/bus/usb/001/003
Aug 29 19:44:22 hotplugd: DEVPATH:1-1.1
Aug 29 19:44:22 hotplugd: SUBSYSTEM:usb
Aug 29 19:44:22 hotplugd: ##### ACTION:add
Aug 29 19:44:22 hotplugd: DEVICE:/proc/bus/usb/001/003
Aug 29 19:44:22 hotplugd: DEVPATH:1-1.1:1.0
Aug 29 19:44:22 hotplugd: SUBSYSTEM:usb
Aug 29 19:44:22 hotplugd: INTERFACE:7/1/2
Aug 29 19:44:22 hotplugd: ##### ACTION:add
Aug 29 19:44:22 hotplugd: DEVICE:/proc/bus/usb/001/003
Aug 29 19:44:22 hotplugd: DEVPATH:1-1.1:1.1
Aug 29 19:44:22 hotplugd: SUBSYSTEM:usb
Aug 29 19:44:22 hotplugd: INTERFACE:255/1/1
Aug 29 19:44:22 hotplugd: ##### ACTION:add
Aug 29 19:44:22 hotplugd: DEVNAME:lp0
Aug 29 19:44:22 hotplugd: DEVICE:/proc/bus/usb/001/003
Aug 29 19:44:22 hotplugd: DEVGUID:00CNBW6CQ9BZ0
Aug 29 19:44:22 hotplugd: DEVPATH:lp0
Aug 29 19:44:22 hotplugd: SUBSYSTEM:usb
Aug 29 19:44:22 hotplugd: PHYSDEVPATH:/devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0
Aug 29 19:44:22 hotplugd: hotplugd.c:368 create virtual node=/dev/usb/03f0:3817:00CNBW6CQ9BZ, minor=0
Aug 29 19:44:22 hotplugd: hotplugd.c:790 ##### complete device hotplug!!
Aug 29 19:44:22 hotplugd: external_disk_port_check.c:88 expected sdx or /dev/sdx, not lp0
Aug 29 19:44:22 hotplugd: hotplugd.c:368 create virtual node=/dev/usb/03f0:3817:00CNBW6CQ9BZ, minor=0
Aug 29 19:44:23 cupsd[5897]: RELOAD_ALL_CONF
Aug 29 19:46:14 scemd: scemd.c:328 stop manutild.
Aug 29 19:54:07 scemd: scemd: power button pressed, ret = 0
Aug 29 19:55:49 syslogd started: BusyBox v1.16.1
Aug 29 19:55:49 dhcpcd[2586]: dhcpReboot: do not want cache

[fmartens]

Heb je toevallig een smargo kaartlezer en oscam geinstalleerd? Ik heb dit probleem bij het afsluiten van de NAS. Hier zijn mijn bevindingen:

1) Reboot commando zonder smargo: geen problemen, herstart wordt netjes uitgevoerd.
2) Reboot commando met smargo: Reboot blijft hangen, blauwe led knippert, leds van HDD zijn groen, status led is uit.
3) 'Herstarten' via web interface werkt volledig.

Ik kreeg de tip van Mobile-Harddisk om een issue neer te leggen bij Synology zelf.

Met vriendelijke groet,
Freddy